TRAITS:
1. With the development of electronic production becoming more and more lighter, thinner, shorter, smaller, wire matched is tend to be thinner, shorter andhigher precision. This machine focus on the improvement mentioned, it caneasily machining wire within 50mm which was thought to be much difficult inthe past. It even can strip 0.3mm from each side from1mm wire. Besides, it can set speed for wire sending, enter knife, return knife re-peel and peel at the same time. For separate wire, this machine can force to strip 99mm, which Overcome the problem of separate wire can not be stripped completely or damage the core.
2. Size is clear at a glance on the liquid board.
3. Width, thickness and size is set by button.
4. It can easily set up size, and correct it according to computer indication if anything wrong. Further, it could set up and clearly show total piece and bundle. 5. Two lines could work at one time.
6. It can cut short wire, thin wire, over precision wire.
7. This machine can machining two pieces of wire at one time, which highly increased the capacity, which is the most advanced technology, it can work with one or two lines, so as to easily rise to the occasion of sample producing and mass production.

TRAITS:
Made for electronic wire, silica gel wire, iron fulong wire, fiberglass wire, coaxial wire, bushing, etc.Special functions, such as automatic cutting, stripping, semi-stripping, middle stripping, wrest wire can be adjusted for different specification and size in seconds.

SPECIFICATIONS:

MODEL	ZC-220 ZC-220+T
DIMENSION	ZC-220:450mm×450mm×360mm ZC-220+T:450mm×720mm×360mm
WEIGHT	ZC-220:36kgs(NET) ZC-220+T:39kgs(NET)
POWER SUPPLY	AC 110V/220V 50/60HZ
POWER WASTED	MIN.20W MAX.220Wm
CUTTING LENGTH	0.1-60000m
STRIPPING LENGTH	0.1-999mm(Depends on wire material)
WREST LENGTH	0.1-999mm(Depends on wire material)
ERROR	Adjustable
DIAMETER	AWG#16-AWG#32(Depends on wire material)